Eagle Head Pin, Pewter

The eagle
An eagle’s head in profile, hooked beak and piercing eye, with every neck feather worked in relief. The eagle stands for freedom and the road seen from above: one of the symbols bikers wear most. The pin is 8 mm (0.31 in) thick at the centre, with flat edges that sit flush on the leather.

Three attachment points
At 39 mm (1.54 in) wide and 36 mm (1.42 in) high, this pin sits on three posts: it stays firmly in place on your vest. To make sure you never lose it on the road, try our locking pin backs (you’ll need three).

Handmade, piece by piece
In our family workshop, since 1989, every pin is cast in solid pewter in our own moulds, deburred by hand and given an aged silver patina. The patina brings out every detail of the relief, and pewter never rusts. And it looks even better in real life than in the photo: the relief and patina really show once it’s in your hand.

Technical specifications:

• Attachment points: 3 posts on the back, supplied with butterfly clutches
• Width: 39 mm (1.54 in)
• Height: 36 mm (1.42 in)
• Weight: 13.5 g (0.48 oz)
• Thickness: 8 mm (0.31 in) at the centre, flat edges
• Maximum fixing thickness: 2 mm (0.08 in) with butterfly clutches, 3 mm (0.12 in) with our locking pin backs
• Finish: hand-applied aged silver patina
• Material: solid French pewter
• Made: in our workshop in France